Olympia Chimney Chimney Liner & Rebuild Nationwide

Olympia Chimney Chimney Liner & Rebuild in Lawrence: What to Know First

We replace and rebuild Olympia Chimney liners in Lawrence, NY, and most jobs are done in a single day once we’re on site. A stainless liner replacement typically runs $2,200 to $4,800 here depending on flue height and whether the old clay tile has to come out first. You’ll get the exact number before we touch a thing, and the camera footage to back up whatever we recommend.

Call (516) 604-2573

This page is for homeowners in Lawrence and the Five Towns who own an Olympia Chimney product, whether it’s a stainless liner, a chase cover, or a full chimney system, and want to know what’s actually going on up there. If you’re not sure whether you need a liner at all, call (516) 604-2573 and Wendell or one of the crew will talk you through it honestly.

We are an independent Olympia Chimney service provider, not a factory-authorized dealer. That means we’re free to tell you when a repair will work and when a full rebuild is the only honest call.

How Olympia Chimney Products Fail - and How We Fix Them

Olympia makes solid stainless chimney components, but every brand has its weak spots. After years of working on these systems in Lawrence, here’s what we actually see:

• 316L flexible liner pitting at the first elbow. Olympia’s 316L flex liners hold up well in most gas and wood setups, but in older Lawrence homes where the flue makes a hard offset just above the smoke shelf, condensation and acidic creosote collect right at that bend. We’ll see small pinholes there before anywhere else. The fix is usually a liner replacement with a smoother offset, and we’ll show you the pitted section on camera before pulling anything out.
• Chase cover rust-through on Olympia factory-built chimneys. The chase tops on some Olympia prefab systems are galvanized rather than stainless, and salt air from being this close to the water accelerates rust. In Lawrence, we replace these more often than people expect. We’ll check for water staining on the ceiling around the chase first, then confirm with a camera from the top. A rusted chase cover will take out the whole chase wall if you let it go.
• Loose or failed slip joints between liner sections. Olympia rigid liner sections lock with a snap-together slip joint. When a chimney runs through an unheated chase and goes through years of freeze-thaw cycles, those joints can work loose. The symptom is usually a faint metal rattle or a draft smell in the house on windy days. We reseat and secure the joints, and if the metal has deformed, we swap the affected sections.
• Improperly sized liner from an old install. Plenty of Lawrence homes got an Olympia 6-inch liner dropped into a flue sized for 8 inches back when gas inserts became popular. The liner works, but draft suffers and condensation builds up. Part of our job is measuring the actual appliance BTU load against the flue dimensions and telling you if the liner was never right for the stove or fireplace it’s serving.
• Cracked crown letting water behind the liner. The crown is the concrete cap at the top, and in this climate, freeze-thaw spalling is the norm. When a crown cracks, water seeps between the clay tile and whatever liner is inside, rusting the liner from the outside in. We rebuild crowns with a proper overhang and drip edge, then check the liner for hidden corrosion before deciding if it can stay.

Our Olympia Chimney Chimney Liner & Rebuild Process

Here’s how a typical Olympia job goes from the first call to the last handshake:

1. 1
   Call and talk to a person. You reach a live voice at (516) 604-2573. We’ll ask about your setup, your symptoms, and your schedule, then book a time with a real arrival window.
2. 2
   We inspect from both ends. Wendell or a crew member checks the firebox, the flue, the crown, and the chase. The camera goes up the liner so you see exactly what we see, not what we describe from memory.
3. 3
   You get a straight verdict. Sometimes the Olympia liner is fine and the crown just needs work. We’ll tell you that. If it needs replacing, you’ll get one price that covers the entire job, parts and labor, before we start.
4. 4
   Parts decision, explained to you. When original Olympia parts are available and make sense, we use them. When a quality aftermarket liner from DuraFlex or HeatShield does the same job for less, we tell you that too and let you decide with real numbers.
5. 5
   Install or rebuild. We pull the old liner, install the new one, seal everything, and rebuild whatever needs rebuilding, whether that’s just the flue or the full top of the chimney.
6. 6
   We test and prove it. Before we leave, we run a draft test and show you the camera footage of the finished install. The 90-Day Done Right Promise is in writing on the invoice. If anything isn’t right, one call brings us back at no charge.

What Olympia Chimney Chimney Liner & Rebuild Costs in Lawrence

Here are honest ranges for the jobs we do most in Lawrence:

What moves the price: flue height, whether the old clay tile has to be broken out, roof access, and the condition of the surrounding masonry. We also knock $40 off any repair over $200, and seniors and veterans always get 10% off. Call (516) 604-2573 for a free estimate, and you’ll hear a real number, not a range that changes at the door.

Why Lawrence Homeowners Call Top Hat Chimney for Olympia Chimney Work

Wendell Pike started Top Hat Chimney in 1999, and he’s been working Lawrence chimneys long enough to know which streets still have the original clay tile and which houses have been patched one too many times. He puts his name and license number on every job, lives in the communities he serves, and runs into you at the hardware store on Saturday. If it’s clean, he’ll tell you it’s clean.

Every Olympia liner or rebuild we do comes with the 90-Day Done Right Promise in writing. One call brings us back. Our crew is background-checked and uniformed, we answer the phone around the clock with a live person, and we work with trusted brands across the board, including DuraFlex, HeatShield, and Gelco, so you’re never locked into one manufacturer’s parts availability or pricing. And if you’ve got a written quote from another company, we’ll give you a free second opinion on it.

FAQs